HEIDENHAIN 548431-05, Руководство пользователя, Страница: 424 / 722

ICP programming |
ICP editor
submode in
smart.Turn
mode of operation
6
424
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Editing contours for cycles
Creating a new workpiece blank contour:
Select the
ICP
menu item
Select Workpiece blank or New auxiliary blank
in the ICP submenu
Select the
Contour menu item
The
ICP editor
submode switches to entering
the complex workpiece blank contour
Alternative: Select the
Bar menu item
Describe the standard workpiece blank
Bar
Alternative: Select the
Tube
menu item
Describe the standard workpiece blank Tube
Creating a new contour for turning:
Select the ICP menu item
Select the contour type in the ICP submenu
Select the
Contour editing
menu item
Alternative: Press the Insert element soft key
ICP
waits for you to enter a new contour
Loading a contour from the cycle editing:
Select the ICP menu item
Select the contour type in the ICP submenu
Press the
Contour list soft key
ICP editor
submode shows the list of the
contours created in cycle mode.
Select and load the contour
Editing an existing contour:
Select the ICP menu item
Select
Contour editing
in the ICP submenu
Alternative: Press the Change ICP contour soft
key
The
ICP editor submode displays the selected
existing contour for subsequent editing