HEIDENHAIN 548431-05, Руководство пользователя, Страница: 185 / 722

Teach-in | Single cut cycles
5
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
185
Approaching the tool change position
Select
Single cuts
Select Rap. trav. positioning
Press the T-Change approach soft key
The tool moves at rapid traverse from the current position to the
Tool change point .
Further information: "Tool change point G14", Page 180
After reaching the tool change point, the control switches to the
tool indicated in
T .
Cycle parameters:
G14 : Tool change point – Sequence (default: 0)
0: Simultaneously
(diagonal path of traverse)
1: First X, then Z
2: First Z, then X
3: Only X
4: Only Z
5: Only Y
(machine-dependent)
6: Simultaneous w/ Y (machine-dependent)
T : Tool number – turret pocket number
ID
:
ID no.
MT : M after T : M function that is executed after the tool call T
MFS : M at beginning : M function that is executed at the
beginning of the machining step
MFE
:
M at end
:
M
function that is executed at the end of the
machining step
WP : No. of spindle – Displays which workpiece spindle is used
to execute the cycle (machine-dependent)
Main drive
Opposing spindle for rear-face machining
BW : Angle in the B axis (machine-dependent)
CW
:
Reverse the tool
(machine-dependent)
HC : Shoe brake (machine-dependent)
DF : Miscellaneous function (machine-dependent)