HEIDENHAIN 548431-05, Руководство пользователя, Страница: 360 / 722

Teach-in | Drilling cycles
5
360
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Deep-hole drilling
A hole is to be bored through the workpiece outside the turning
center with the
Deep drilling axial cycle. This machining operation
requires a traversable spindle and driven tools.
The parameters
1st hole dpth P
and
Hole depth reduct. val IB
define the individual passes, and the Minimum hole depth JB
limits the hole depth reduction value.
As the
Return length B
is not defined, the drill therefore retracts to
the Start point after each pass, remains there for the programmed
dwell time, and then advances again to the safety clearance for the
next pass.
Since this example is to illustrate how you drill a through hole, the
End point drill Z2
is programmed such that the tool has to drill all
the way through the workpiece before it reaches the end point.
The parameters
AB and V define a feed-rate reduction for both spot
drilling and through-boring.
Tool data
TO = 8 – Tool orientation
I = 12 – Drilling diameter
B
= 118 – Point angle
H = 1 – The tool is a driven tool