manualshive.com logo in svg

HEIDENHAIN 548431-05, Руководство пользователя, Страница: 565 / 722

Поделиться
Скачать
HEIDENHAIN 548431-05 Скачать руководство пользователя страница 565

Tool and technology database | Tool editor mode of operation

 

8

 

HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017

565

Tool control graphics

When the tool dialog box is open, the control provides a control

graphic with which you can check the entered tools. To do so,
press the 

Graphic

 soft key.

The control generates the displayed tool from the entered

parameters. The tool control graphic enables you to check the

entered data. Changes become effective as soon as you exit the

input field.

Tool texts

Tool texts are assigned to the tools and displayed in the tool list.

The control manages the tool texts in a separate list.
Connections:

The descriptions are managed in the tool text list. Each entry is
preceded by a 

QT

 number.

The parameter 

Tool text

 

QT

 contains the reference number for

the 

tool text

 list. The text indicated by 

QT

 is then displayed in

the tool list.

When the tool dialog is open, the control lets you enter tool texts.
Press the 

Tool texts

 soft key.

You can define up to 999 tool texts with a length of max. 80

characters.

New texts are inserted in the next free line after the

cursor position
When deleting and editing a tool text, please

remember that the text might be used for more than

one tool

Содержание 548431-05



















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов