FALTVERDECK
10
FV 02/16
www.hasebikes.com
Punkte C:
8. Ziehen Sie den Spanngummi (13) um das Achsrohr und
hängen Sie die Schlaufe um die Schraube (14) der Sitzstrebe.
Achten Sie darauf, dass das Gummiband nicht an der Nabe
oder der Antriebsschraube schleift.
Bei Modellen mit Sitzlehnenverstrebung (ab 2014):
Ziehen Sie den Spanngummi (13) um das Achsrohr und
hängen Sie die Schlaufe um die Schraube (15) der Achsklem-
mung. Der Spanngummi muss unter Spannung stehen. Kürzen
Sie daher den Spanngummi indem Sie zB. einen zusätzlichen
Knoten machen.
9. Wiederholen Sie den Vorgang auf der rechten Seite.
Punkt D:
10. Stecken Sie die beiden Teile der Steckschließe (16) unter dem
Hauptrahmen zusammen.
11. Ziehen Sie anschließend am Punkt B das Gummiband stramm.
12. Vergewissern Sie sich, dass der Spritzschutz nirgendwo die
Bewegungsfreiheit der Lenkung einschränkt. Ziehen Sie gege-
benfalls die Schnalle (5) (Bild vorige Seite) unter der Sitzbe-
spannung fester an.
Achtung!
Unfallgefahr. Der Spritzschutz muss so gespannt sein, dass
die Bewegungsfreiheit der Lenkung nicht eingeschränkt wird.
Tasche anbringen
In der als Zubehör erhältlichen Tasche können Sie bei Sonnen-
scheinfahrten das Faltverdeck unterbringen. Die Tasche selbst,
wird an der Rückseite des Sitzgestells angebracht.
1. Ziehen Sie die beiden Enden des Spanngurtes (1) durch das
Gestell (2) und stecken Sie die beiden Teile der Schließer
zusammen.
2. Ziehen Sie den Spanngurt (1) stramm. Achten Sie darauf, dass
das Ritzel nicht an der Tasche schleift.
Hinweis:
An der Rückseite des Sitzgestells lässt sich eine weitere
Packtasche befestigen.
Points C:
8. Pull the elastic band (13) around the axle tube, and hook the
loop onto the screw (14) of the seat stay. Check to make
sure that the elastic band cannot come in contact with the
hub or the drive screw.
For models with the new seat stay (from 2014):
Pull the elastic band (13) to the axle tube and hook the loop
to the screw (15) of the axis clamp. The elastic cord must
be under tension. Shorten the elastic band for example by
making an additional node.
9. Repeat Step 8 on the other side.
Point D
:
10. Close the plastic buckle (16) beneath the main frame.
11. Then tighten the elastic cord at Point B.
12. Check to make sure that the mounted splash guard does not
restrict steering. If necessary, tighten the strap (4, page 8)
under the seat cover.
Caution!
Safety hazard: It is of upmost importance that the splash
guard does not restrict the movement of the steering assem-
bly.
Mounting the Fairing Bag
On sunny trips, the Foldable Fairing can be stowed in the optional
Fairing Bag. The bag itself is mounted behind the seat to the seat
frame.
1. Pull both ends of the mounting strap (1) through the frame
(2) as shown, and close the buckle.
2. Tighten the mounting strap (1). Check to make sure that the
bag cannot come in contact with the sprocket.
Note:
A pannier can be attached to the seat frame in addi-
tion to the Fairing Bag
16
14
13
1
2
Montage
/ Mounting
C
D
15