Section 4
♦
Operating the CMN-41
CMN-41 Series Installation and Operation Handbook
47
Copyright © 2009, Harris Corporation
Figure 4-28
shows the PIP function enabled in Overlay Display mode, along with the
waveform and vector displays.
Figure 4-28. Sample PIP Display
Moving a PIP
To move a PIP, make sure the PIP function button and the VIEW button are in high
tally. Use the Up/Down and Left/Right arrow knobs to reposition the PIP on the
display.
Scaling a PIP
To scale a PIP display’s size, make sure the PIP function button and the VIEW button
are in high tally. Use the curved arrow knob to resize the PIP on the display.
Removing a PIP
To remove a PIP from the display, make sure the PIP function button is in high tally,
and then press the PIP function button. The display disappears from the screen.
Audio Display
Press and release the AUD function button to display the audio display.
The CMN-41 accepts one AES/EBU and up to four groups of embedded
audio inputs. Any two input channels can be selected to be monitored on
the headphone output.
Press and hold the AUD function button to access Audio Setup menu selection options.
