Hanwha Techwin Wisenet PRN-4011 Скачать руководство пользователя страница 8

Страница: 8 / 88

live

Name

Description

Camera

Operation

FULL

RAID

SCSI

This icon is displayed for a channel that a PTZ-featuring camera is connected to.

FULL

RAID

SCSI

Displays AUDIO ON/MUTE. Not displayed in video mode if deactivated.

FULL

RAID

SCSI

If the sensor is set to <

>, the input signal will be displayed on the screen of the

connected channel.

FULL

RAID

SCSI

This icon is displayed when Motion Detection is set to <

> and a camera motion or

camera event occurs.

It displays the status of general/event/scheduled recording.

FULL

RAID

SCSI

It is displayed when it fails to decode all the frames due to limited decoding performance

and in this case only the I-Frame is decoded.

FULL

RAID

SCSI

This is displayed when a POS (text) event occurs.

FULL

RAID

SCSI

RED

- Displayed when there is any abnormality in the RED-SD card.

YELLOW

- Displayed when there is no storage space in the SD card.

FULL

RAID

SCSI

Flickers when a defocus event occurs. When you click the icon, a simple focus command

is sent to the camera.

Name

Description

System

Operation

FULL

RAID

SCSI

Displayed if the HDD is full and the NVR has an insufficient space to record.

FULL

RAID

SCSI

Displayed when there is no HDD or HDD is not detected.

FULL

RAID

SCSI

Displayed if the HDD needs a technical examination.

FULL

RAID

SCSI

It is displayed when there is a malfunctioning HDD in the RAID.

There are one or two HDD malfunctions but you can still read or write to it.

Only provided for products that support RAID. (Product Specification Manual, page 4)

FULL

RAID

SCSI

It is displayed when recovering a RAID Error.

Only provided for products that support RAID. (Product Specification Manual, page 4)

FULL

RAID

SCSI

It is displayed when you cannot write RAID due to a malfunction of HDD.

Only provided for products that support RAID. (Product Specification Manual, page 4)

FULL

RAID

SCSI

Displayed when the total amount of input data exceeds the total amount of data allowed.

FULL

RAID

SCSI

It is displayed when an iSCSI device is disconnected.

Only provided for products that support iSCSI. (Product Specification Manual, page 4)

FULL

RAID

SCSI

It is displayed when the network is overloaded.

It occurs when the max receiving allowance is exceeded, causing an overload to the

CPU. It will disappear if you modify the camera settings or delete a camera to reduce

the performance burden.

FULL

RAID

SCSI

It is displayed when there is firmware to update the server.

Video Input

Status

Displayed if no input is entered in the condition that the camera is set to <

FULL

RAID

SCSI

Displayed when the live image with the camera turned <

> exceeds the supported

resolution.
Displayed if no permission to live view is granted.
If the camera channel is <

OFF

>, the camera is not registered, or it is set to <

Covert2

the live screen will display nothing. For <

Covert1

>, the screen will display nothing but

OSD.

Camera Title / Channel

Display the camera title and channel number.

Содержание Wisenet PRN-4011

























































































Результаты поиска

Содержание Wisenet PRN-4011

Отзывы:

Похожие инструкции для Wisenet PRN-4011

Бренды по названию

Популярные бренды

Hanwha Techwin Wisenet PRN-4011, Руководство пользователя

Результаты поиска

Содержание Wisenet PRN-4011

Отзывы:

Похожие инструкции для Wisenet PRN-4011

Бренды по названию

Популярные бренды