ip filtering
You can prepare the list of IP addresses to allow or block access to a specific IP address.
menu > network > ip filtering
•
Filtering Type :
- Deny : If you select reject, access to the registered IP address will be limited.
- Allow : If you choose permit, then they can only access the registered IP addresses.
•
Use : Select the checkbox for the IP address that will use IP filtering.
•
IP Address : Enter the IP address for filtering.
•
Filtering Range : If you enter an IP address or prefix, then the range of IP addresses blocked or permitted will
be displayed.
J
`
If a camera's IP address is not included in the Permit list or is in the Reject list access to it will be rejected.
`
For IPv4, camera IP filtering through PoE port is not immediately applied. (Previous connections are maintained, and filtering
is applied on next login.)
SSl
You can select a security connection system or install public certificates.
menu > network > SSl
•
Secured Connection System : You can select a type of security connection system.
- HTTP (Non-secured connection)
- HTTPS (Secured connection using unique certificate)
- HTTPS (Secured connection using public certificate)
J
`
If the NVR device is connected to the external internet or installed in an environment with high priority for security, making a
secure connection is recommended.
•
Install Public Certificate : You can scan and register public certificates to be installed.
If you want to use a certificate, you need to install a certificate file along with and an encryption file.
`
The <
HTTPS (Secured connection using public certificate)
> menu can be selected only if there is a registered public
certificate.
48_
menu setup
menu setup
