You can send an e-mail to a NVR-registered user at a specific time interval, or if an event occurs.
Smtp Setting
Sets the SMTP mail server.
menu > network > e-mail > Stmp
•
Server Address : Enter the SMTP server address to connect to.
•
Port : Sets the communication port.
•
Use Authentication : Check this if the SMTP server uses user authentication.
The account input box will be activated.
•
ID : Enter a ID to use authentication when connecting to the SMTP server.
•
Password : Enter the password of the SMTP server user.
•
Secure Transfer : Select one from <
never
> and <
tlS (if available)
>.
•
Sender : Use the virtual keyboard to enter the sender's e-mail address.
`
See "
Using virtual keyboard
" in the Appendix.
•
E-mail Test : Conducts the test on the server settings.
event Setting
You can set the interval and type of the event that will be sent to the user.
menu > network > e-mail > event
•
Event Interval : Set the event interval.
`
If a series of events occurs, the e-mail will be sent at the specified interval, not on each event.
•
Use Event Transfer : Select an event type to send if an event occurs.
If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.
recipient Setting
You can create a group and add users to it or; you can delete users and change a group.
menu > network > e-mail > recipient
•
Click on <
> to add a group.
Select a group name and the privilege.
•
Select a recipient group to receive emails.
If a group is added, it will appear in the group list.
•
Click on <
> to add a recipient.
Select a group and enter names and email addresses.
If a group is created, you can add a recipient.
`
For information on entering user name and email address, see "
Using virtual keyboard
" in the Appendix.
50_
menu setup
menu setup
