video loss detection
You can set the camera so that the camera can trigger the alarm if it is disconnected or the video is lost due to
unstable network connection.
menu > event > video loss detection
•
Apply to CH : If you select <
apply to cH
>, the "
apply to cH
" confirmation window will appear.
After selecting channels that the settings will be applied to, click on <
ok
> to apply them to the selected
channels.
•
CH : Click <
> to display the channel information table.
•
Video Loss State : Specify the use of video loss detection.
•
Alarm Out : Select an alarm output method.
`
For alarm output, see the "
HDD Alarm Setting
" in "
Menu Setup
>
Setting the Device
" in the Table of Contents.
•
Alarm Duration : Specify the duration of the alarm output with the beep.
video analysis Setup
•
Area: Click the Setup button to set a video analysis area.
- In VA Type, you can set a virtual line, virtual area, and detection excluded area.
•
Object Size: Click the Setup button to set the size of object whose motion is to be detected.
•
Sensitivity: You can set the motion detection sensitivity for the virtual line and the virtual area.
•
Detection Result Overlay: You can overlay the detection area over video.
•
Activation time: You can set the activation time to recognize motion analysis.
- Always: Detects motion analysis regardless of time.
- Schedule: Detects motion analysis only during the set period.
•
Virtual Area: You can set the details of virtual areas to fit your purposes.
- Intrusion: Creates an event when the motion of an object in the designated area is detected.
- Cam Entering: Creates an event when a moving object enters into the target area from the outside.
- Cam Exiting: Creates an event when a user goes out of the target area.
- Cam Appearing/Disappearing: When an object which does not exist inside the area designated by the user
appears inside the area without passing the area line and remains for a certain period of time, or if an object
which exists inside the area disappears, an event is created.
- Loitering: Creates an event when the motion of a loitering object in the virtual area is detected.
M
`
Minimum Duration (sec): You can set the minimum time required to create an event after object detection for each virtual
area. If an object keeps being detected over the set period, an event is created.
detection-excluded area/non-detection area setup
In the virtual line and area, you can set areas to exclude motion detection from.
M
`
Area Initialization: You can clear all the set areas.
`
Add: You can create an event area within an area.
`
The camera MD/VA setup is applied to the camera setting.
`
Each camera product support different features. For more information, see the camera manual or help.
44_
menu setup
menu setup
