Media-Mate Plus Operation Manual
25-710-800-O
Table of Contents
________________________________________________________________________ iii
Section One – Safety Considerations ____________________________________________ 1
General ____________________________________________________________________ 1
Safety Markings_____________________________________________________________ 1
Section Two – Introduction _____________________________________________________ 3
Design Features ____________________________________________________________ 3
Section Three – Specifications __________________________________________________ 4
Section Four – How It Works ____________________________________________________ 5
Section Five – Installation ______________________________________________________ 9
Location ___________________________________________________________________ 9
Unpacking _________________________________________________________________ 9
Parts Identification _________________________________________________________ 10
System Check-out __________________________________________________________ 10
Installation ________________________________________________________________ 14
Start Up __________________________________________________________________ 15
Section Six – Validation and Calibration _________________________________________ 16
Pre-Heat Temperature Calibration_____________________________________________ 16
Adjustment of Sensor Display Temperature ____________________________________ 16
Volume Delivery Calibration _________________________________________________ 17
Fine Adjustment of the Delivery Volume _______________________________________ 17
Deaeration Validation _______________________________________________________ 20
Temperature Controller (PID) Set-Up __________________________________________ 20
Temperature Calibration Record ______________________________________________ 21
Volume Calibration Record __________________________________________________ 22
Deaeration Validation Record ________________________________________________ 23
Section Seven – Operating Instructions _________________________________________ 24
Volume Selection __________________________________________________________ 24
Temperature Setting ________________________________________________________ 24
Fill Time Setting ___________________________________________________________ 25
Configuring the Dispense Head ______________________________________________ 26
Media-Mate Plus Interface with Distek 2100 and 2100B ___________________________ 27
Test Cycle ________________________________________________________________ 29
Table of Contents
i
