Media-Mate Plus Operation Manual
25-710-800-O
What’s New
Revision O
Section Three - Specifications
Changed Tank Capacities to “about 18 liters”.
Section Seven – Operating Instructions
Changed Temperature Setting to “at least the 18-liters mark.”
Section Eight – Troubleshooting
Changed Temperature Control Problems to “Fill Tank to at least the 18-liter mark.”
Revision M
Section Six – Validation and Calibration:
Updated Adjustment of Sensor Display Temperature steps.
Updated new Watlow controller.
Section Seven – Operating Instructions:
Added newer dissolution tester models.
Revision L
Section Three – Specifications:
Changed “Media Tank Volume (unusable)” to 2 L to reflect low volume tank upgrade.
Revision K
Section Five – Installation:
Added photo of filter housing.
Section Seven – Operation:
Adjusted fill time recommendations for new 0.007” gap fill tubes.
Section Nine – Maintenance:
Added procedure for replacing filter on systems equipped with a filter housing.
Section Eleven – Parts, Supplies, and Accessories:
Added new fill tube to parts list.
Revision J
Section Six – Validation and Calibration:
Calibration Gauge Set (p/n 91-902-045) added.
Section Eleven – Parts, Supplies, and Accessories
Numerous spare parts, kits, tools, and accessories added.
Section Twelve – Sales and Support
Hanson Research Corporation contact information and procedure updated.
What’s New
iii
