Media-Mate Plus Operation Manual
25-710-800-O
Section Three – Specifications
Weight
Without media:
67 kg (148 lbs)
With 40 liters of media:
107 kg (236 lbs)
Size
Length:
80.9 cm (31.9 in.)
Width:
53.4 cm (21.0 in.)
Height:
114.0 cm (44.8 in.)
Electrical
Voltage:
115 VAC or 230 VAC ± 10%
Frequency:
50/60 Hz
Current:
13 Amp (115 VAC) or 8 Amp (230 VAC)
Phase:
single
115 VAC Units
230 VAC Units
4 Fuses (TT Type):
One 1/2 Amp, 250 VAC,
One 3/4 Amp, 250 VAC,
One 8 Amp, 250 VAC,
One 15 Amp.
One 1/2 Amp, 250 VAC,
One 3/8 Amp, 250 VAC,
One 5 Amp, 250 VAC,
One 8 Amp, 250 VAC.
Environment
Maximum ambient temperature:
5
°
C below temperature set point
Maximum humidity:
<
85 %
Performance
Cycle time:
less than 5 minutes
Pre-heat temperature range:
30
°
C to 45
°
C
Pre-heat temperature control accuracy:
± 0.5
°
C
Pre-heat temperature readout accuracy:
± 0.2
°
C
Pre-heat time (21 to 37 deg C):
60 minutes
Delivery volume range:
250 mL to 1000 mL
Delivery volume accuracy:
± 1.0 %
Deaeration:
95% saturation maximum
Filtration:
5 micron nominal
NOTE:
Accuracy may be improved by fine adjustment (see
Section 6 – Fine Adjustment of the Delivery Volume).
Tank Capacities
Media Tank Volume (usable):
40 liters (10.5 gal)
Media Tank Volume (unusable):
2 liters (0.53 gal)
Media Volume to Top of Filter:
8 liters (2.1 gal)
Media Volume when low water level sensor turns heater off:
about 18 liters
Materials Wet
Tank
High Density Polyethylene
Heater
Teflon Coated
Filter
Polyethylene
Flask
S.A.N (Styrene/Acrylic/Nitrile)
Fittings and Fill Hose
PVC
Tubing
Stainless Steel and Tygon
Section 3
Specifications
4
