manualshive.com logo in svg

Hach AutoCAT 9000, Инструкция по эксплуатации

Поделиться
Скачать
Hach AutoCAT 9000 Скачать руководство пользователя страница 32

Basic Operation

Basic Operation
Page 30

50081_Operation.fm

3.3.10 Customizing the Station

From the Setup

 

menu, select Customize. 

1.

Highlight Station. 

2.

Input the desired station information. 

3.

Press the

 

CHECK MARK

 

to confirm.

4.

Individually highlight text lines 1–4 (below Laboratory).

5.

Input text (up to 32 characters x 4 lines). After the entry of each line, press  
the

 

CHECK MARK

 

to validate and move to the next line.

6.

Press 

ESC

 to return to the Setup menu.

Note:

A typical workstation is defined with a name, user(s) name(s), address, contact information, 

etc.

3.3.11 Reset to Factory Settings

This option will return the AutoCAT parameters to factory defaults. All user-installed 
information, archived analysis results, method/titrant library changes, etc., will be 
erased. Only the burette parameters will remain in memory.

1.

From the Setup menu, select Reset to Factory Settings.

2.

Press the

 

CHECK MARK

 or Press 

1

 to confirm the selection and return to the Setup 

menu. 

3.3.12 Exit

This selection allows the user to exit the Setup menu and return to the main menus with 
either supervisor or routine access.

1.

From the Setup

 

menu, select Exit. 

2.

Highlight Return In Mode. Press the 

CHECK MARK

 

to confirm the selection. 

3.

Press the 

UP

 

or

 DOWN 

key. Press the

 

CHECK MARK

 

to validate.

4.

Select Confirm. The Methods menu will be displayed.

3.4 Edition Mode

The AutoCAT 9000 edition feature allows the user to multi-task by viewing/editing 
parameters during embedded procedure timer and data collection periods. This can only 
be accessed during data collection, timers, and on screens where Esc is not defined.

1.

To access the Edition feature (during a titration/calibration):

a.

Press 

ESC.

b.

Select Edition.

The user can now access parameters and make any desired changes.

2.

To return to the embedded procedure:

a.

Press 

ESC.

b.

Select Analysis Window.

Note:

Access to parameters is governed by the access mode (Supervisor/Routine).

Содержание AutoCAT 9000

















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды