manualshive.com logo in svg

Hach AutoCAT 9000, Инструкция по эксплуатации

Поделиться
Скачать
Hach AutoCAT 9000 Скачать руководство пользователя страница 123

Total Oxidants

Total Oxidants

50081_TotalOxidants.fm

Page 121

9.

Add 1.0 g of potassium 

iodide (KI).
Press the 

CHECK MARK

 

to confirm.

Note: 

KI is added in excess; 

the precise amount added is 
not crucial to the accuracy or 
precision of the analysis.

10.

Add 1.0 mL of pH 4 

acetate buffer.
Press the 

CHECK MARK

 

to confirm.

Note: 

Acetate buffer is added 

to adjust the sample pH; the 
precise amount added is not 
crucial to the accuracy or 
precision of the analysis.

11.

The timer will start. 

This allows a short period of 
time for the reagents to mix 
before starting the titration.

12.

 Lower the electrode 

head onto the beaker rim.
Press the 

CHECK MARK

 

to confirm.

13.

The analysis parameters 

that have been stored for the 
current Sub-ID may be 
edited at this time.
Highlight the appropriate 
line and press the 

CHECK MARK

 to change one 

of the analysis parameters or 
press 1 to confirm.

Note: 

Any changes made will 

become the new default 
parameters for this method 
Sub-ID. 

Note: 

These Sub-ID 

parameters can be edited here 
as 'run-time' settings, or from 
the Main Menu as described in 
Section 3.5.

Note: 

This step will be skipped 

if autoscaling software is 
enabled. 

14.

The timer will start, 

allowing the electrode to 
stabilize before data 
collection.
Once the electrode has 
stabilized, the AutoCAT will 
begin data acquisition and 
plot the titration curve.

15.

The Zoom Range 

Determination window will 
display the titration curve.
Use the navigation buttons to 
select and move the cursors 
to define the range of data 
points for analysis.

Note: 

Defining the range of 

data points excludes 
undesirable portions of the 
titration curve from 
the analysis.

16.

Select type of end point 

determination.
Press 

DEL

 for Manual.

Note: 

Automatic determination 

attempts to identify linear 
segments without user input 
and is 

not

 

recommended

 for 

this method.

Содержание AutoCAT 9000

















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды