manualshive.com logo in svg

Hach AutoCAT 9000, Инструкция по эксплуатации

Поделиться
Скачать
Hach AutoCAT 9000 Скачать руководство пользователя страница 175

Warranty

50081_End.fm

Page 173

Warranty

Hach Company warrants this product to the original purchaser against any defects that 
are due to faulty material or workmanship for a period of 

one year from date 

of shipment

. 

In the event that a defect is discovered during the warranty period, Hach Company 
agrees that, at its option, it will repair or replace the defective product or refund the 
purchase price, excluding original shipping and handling charges.   Any product repaired 
or replaced under this warranty will be warranted only for the remainder of the original 
product warranty period. 
This warranty does not apply to consumable products such as chemical reagents; or 
consumable components of a product, such as, but not limited to, lamps and tubing. 
Contact Hach Company or your distributor to initiate warranty support. Products may 
not be returned without authorization from Hach Company.

Limitations

This warranty does not cover:

•

damage caused by acts of God, natural disaster, labor unrest, acts of war (declared or 
undeclared), terrorism, civil strife or acts of any governmental jurisdiction

•

damage caused by misuse, neglect, accident or improper application or installation

•

damage caused by any repair or attempted repair not authorized by Hach Company

•

any product not used in accordance with the instructions furnished by 
Hach Company

•

freight charges to return merchandise to Hach Company

•

freight charges on expedited or express shipment of warranted parts or product

•

travel fees associated with on-site warranty repair

This warranty contains the sole express warranty made by Hach Company in connection 
with its products. All implied warranties, including without limitation, the warranties of 
merchantability and fitness for a particular purpose, are expressly disclaimed.
Some states within the United States do not allow the disclaimer of implied warranties 
and if this is true in your state the above limitation may not apply to you. This warranty 
gives you specific rights, and you may also have other rights that vary from state to state.
This warranty constitutes the final, complete, and exclusive statement of warranty terms 
and no person is authorized to make any other warranties or representations on behalf of 
Hach Company.

Limitation of Remedies

The remedies of repair, replacement or refund of purchase price as stated above are the 
exclusive remedies for the breach of this warranty. On the basis of strict liability or under 
any other legal theory, in no event shall Hach Company be liable for any incidental or 
consequential damages of any kind for breach of warranty or negligence.

Содержание AutoCAT 9000

















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды