Hach AutoCAT 9000 Скачать руководство пользователя страница 116

Страница: 116 / 176

Sulfite

Sulfite
Page 114

50081_Sulfite_Back.fm

13.

The timer will start and

the reagents will mix for a
short period of time before
titration begins.

14.

Lower the electrode

head onto the beaker rim.
Press

CHECK MARK

confirm.

15.

The analysis parameters

that have been stored for the
current Sub-ID may be
edited at this time.
Highlight the appropriate
line and press the

CHECK MARK

to change one

of the analysis parameters or
press

to confirm.

Note:

Any changes made will

become the new default
parameters for this method
Sub-ID.

Note:

These Sub-ID

parameters can be edited here
as 'run-time' settings, or from
the Main Menu as described in
Section 3.5.

Note:

This step will be skipped

if autoscaling software is
enabled.

Note:

Increment volume

adjustment is not necessary if
the correct oxidant volume is
selected.

16.

The Start Timer will

begin, allowing the
electrode to stabilize before
data collection.
After the electrode has
stabilized, the AutoCAT will
begin data acquisition and
plot the titration curve.

Содержание AutoCAT 9000
















































































































































































Результаты поиска

Содержание AutoCAT 9000

Отзывы:

Бренды по названию

Популярные бренды

Hach AutoCAT 9000, Инструкция по эксплуатации

Результаты поиска

Содержание AutoCAT 9000

Отзывы:

Бренды по названию

Популярные бренды