Hach AutoCAT 9000 Скачать руководство пользователя страница 29

Страница: 29 / 176

Basic Operation

50081_Operation.fm

Page 27

3.2.5 Cell Menu

The Cell menu provides access to stirrer function and speed increment adjustment.

•

Title bar

—displays Cell.

•

Stirring

—allows the user to switch the stirrer On or Off.

•

Speed

—allows the user to adjust the internal stirring speed from 100 to 1100

revolutions per minute (rpm) in 50-rpm increments.

Note:

The default stir speed is 250 rpm.

•

Cell tab—

displays an animated icon that indicates the stirrer status.

3.3 System Configuration

3.3.1 Entering the Supervisor Code

Note:

There is no factory default code. To proceed in supervisory mode, a user-defined code

must be entered.

Turn the instrument ON. From the Methods Menu, press and hold the

STOP

key for

approximately three seconds to enter the Setup Menu.

Input the Supervisor Code input up to 10 digits consisting of any combination of
numbers, upper- and lower-case letters, or symbols. Press the

CHECK MARK

to record

this code. All future access to the Setup menu will require the input of this case-
sensitive code.

Note:

To establish the Supervisor code, see Accessing Supervisor Mode on page 33.

Press the

CHECK MARK

to confirm.

Note:

If already operating in Supervisor mode, the AutoCAT 9000 will not request the supervisor

code to access the Setup menu.

Select the Configuration Menu and proceed to Section

3.3.2

3.3.2 Setting a User ID

Select whether or not a User ID will be required:

Highlight User ID.

Press the

CHECK MARK

to confirm.The title bar will display User ID.

Press the

DOWN

key to toggle between Yes (to enable the User ID function) and

No (to disable the User ID function).

Press the

CHECK MARK

to validate the highlighted selection and return to the

Configuration Menu.

3.3.3 Choose a Language

Highlight Language.

Press the

CHECK MARK

to confirm.The title bar will display Language.

Press the

DOWN

key to highlight one of the available languages (English,

French, or Spanish).

Press the

CHECK MARK

to accept the highlighted selection and return to the

Configuration Menu.

Содержание AutoCAT 9000
















































































































































































Результаты поиска

Содержание AutoCAT 9000

Отзывы:

Бренды по названию

Популярные бренды

Hach AutoCAT 9000, Инструкция по эксплуатации

Результаты поиска

Содержание AutoCAT 9000

Отзывы:

Бренды по названию

Популярные бренды