h/p/cosmos mercury, Руководство пользователя

Страница: 99 / 213

optional settings
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.doc
© 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 99 of 213
[8.A2]
List of user options / optional functions
For devices without UserTerminal: An external UserTerminal or PC software h/p/cosmos para control
®
is required
to control the running machine via RS232 interface.
[8.A2]
Option Description Comment / Display
OP01 Setting back (deleting) of error
messages The required maintenance work has to be performed before deleting
error messages. The h/p/cosmos service department has to be
contacted before one of the service displays or error codes will be
deleted!
Confirmation in display
§
indicating "donE"
Info: This option only sets back the error message! If the error still
exists, you are not able to set back the error message. In this case
consult an authorised service engineer
The following intervals are set back by this operation:
E.01: Oil-interval A-OP 35
E.02: Service-time-interval A-OP 37
E.02: Service-distance-intervall A-OP 38
Note: This option resets exclusively the causing variable. If for
example the E.02 service-time-interval is being set back with this
operation, the distance-interval is not set back and vice versa! Only
Administrator-option OP 47 resets all three values implicitly!
OP02 Total distance covered (km)
§
and
$
indicates: total distance covered in km
%
indicates km
OP03 Indication of total hours of operation (h)
= stand-by-time including runtime of
motor/ running belt
§
and
$
show: operation hours
%
reports: h
OP04 Indication of total hours of operation (h)
= runtime of motor/running belt
§
and
$
report: operation hours
%
shows: h
OP05 Indication of Firmware-Version and date
=
reports “OP05”
!
reports “typE”
"
indicates device type, e.g. “1.4”
§
indicates: „MCU 5“
$
reports version, e.g. “1.01.1”
%
reports default type, e.g. 1.3
OP06 Adjustment of actual date and the real
time clock !
shows: rtc for Real Time Clock
$
reports flashing: date / time, year, month, date, hours, minutes,
seconds