installation & commissioning
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.doc
© 2012 h/p/cosmos sports & medical gmbh [email protected] created 15.02.2012 printed 15.02.2012 page: 56 of 213
[6.D]
Starting the running machines
[6.D1]
Unlocking of the emergency-stop switch
In order to be able to switch on the device, you may have to unlock the Emergency-stop switch first by pulling it
(depending on the type) or turning it around (to the left hand side, see symbol).
[6.D2]
Switching the device on
If the running machine is at an angle of elevation > 0 when switching it on, it will
automatically drive into the position zero (display: ELEVATION „INIT“). So please take care
before switching on, that while driving down the elevation no harm can be done to persons
and there are no objects under the running machine.
No. Illustration
Description
[01]
Release all emergency stop buttons of the treadmill-ergometer.
picture left unlatching by turning
picture below unlatching by pulling
[02]
The expulsion fuse at the front of the device (front terminal below
the hood) has to be switched on.
[03]
Switch on the running machine by using the white key (until 2003
green "ON" or "I" key). at the FrontTerminal. At some models built
before the year 12/2007 the location of the ON-/OFF-key could
also be the UserTerminal.
The indicator light within the key is glowing (if the indicator does
not flash up, please check the power supply, the expulsion fuse
and the Emergency-stop).
