background image

appendix 

file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.doc 

© 2012 h/p/cosmos sports & medical gmbh     author: fh     [email protected]     created 15.02.2012     printed 15.02.2012     page: 207 of 213 

 

 

[06]

 

 

 

 

Inform about cleaning of running-machine, area of the motor and 
especially the light-barriers and ventilation grid. 
 
Before opening the motor hood always pull the plug from the mains. 
 
Maintenance on medical products and electrical devices may only be 
performed by authorised and trained personnel who are certified by 
h/p/cosmos. 

[07]

 

 

 

Inform about periodically recurring maintenance intervals and 
obligatory safety controls and the risks and dangers in case of 
disregarding these points. 
 
Offer and recommend maintenance contract through authorized and 
trained personnel. 

 

[16.D]

 

Advice and support documents 

[01]

 

 

 

Hand over and explain delivery papers (folder). 
Fill out registration form and send it to h/p/cosmos sales. 
Let the customer sign the delivery note and instruction protocol and 
send it back to h/p/cosmos sales immediately. 
Ask for brochure of customer and send it to the sales department at 
h/p/cosmos. 

 

accomplished

 

‰

 

accomplished

 

‰

 

accomplished

 

‰

 

Содержание mercury






















































































































































































































Отзывы: