installation & commissioning
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.doc
© 2012 h/p/cosmos sports & medical gmbh [email protected] created 15.02.2012 printed 15.02.2012 page: 58 of 213
[6.E]
Emergency-Stop / Emergency-Off
When in danger of falling or in any
emergency case please press the
red button of the emergency-stop
at the UserTerminal. At devices
without UserTerminal the red
emergency-stop-button is located
directly at the handrail.
In order to switch on the device
again, unlock the Emergency-stop
by pulling or by turning it slightly
to the left (depending on the
type).
picture left unlatching by turning
picture below unlatching by pulling
Running machines for sports and fitness with manufacturing date before 12/2007 will be ready for operation immediately
(pay attention to the display). Running machines with manufacturing date after 12/2007 resp. all treadmills for medical
application (independet of manufacturing date) have to be switched on with the white main power on „I“ key (until 2003
green “ON” or “I” key) again. Before switching it on again, however, wait for at least 1 to 2 minutes (3 phase devices: 2
to 3 minutes). As mentioned above „Switching the device off“.
N
Use the emergency-stop only if in danger.
N
The emergency-stop is not to be used as a normal stop-key.
picture
type of stop
function
interface
communication
how to restart
Safety Stop =
Emergency Stop
on UserTerminal
(standard on all
machines with
UserTerminal)
N
palm switch is hit
N
running belt & inclination
system stop fast
N
machine is cut off from main
power of drive motor and
inclination system
N
display, keyboard and
interface inactive
communication
interrupted
during cut off
from main
power
N
wait 1 minute
N
pull palm switch
N
push “power on”
button / main
power
N
press START key,
N
or new command
through interface
Safety Stop =
Emergency Stop
External and/or
additional
emergency stop
mushroom head
type.
N
mushroom switch is hit
N
running belt & inclination
system stop fast
N
machine is cut off from main
power of drive motor and
inclination system
N
display, keyboard and
interface inactive
communication
interrupted
during cut off
from main
power
N
wait 1 minute
N
pull mushroom
switch
N
push “power on”
button / main
power
N
press START key,
N
or new command
through interface
