GST200 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
The Intelligent Solution
Page 41
You can set the panel to display network message or not by entering number 2, as
shown in Fig. 6-37.
Fig. 6-37
*Display Mode*
1 Disable
2 Enable
6.4.4
Setting up Beginning Zone Number
Pressing “4” on the screen shown in Fig. 6-29, you can set beginning zone number of
the FACP. The screen is shown in Fig. 6-38. After inputting the number of zones in the
network on highlighted position, press
ENTER
to confirm and return. The zone
numbers of the FACP will start from this number. For example, if the beginning number
is 003, then the FACP zone number will be 003, 004, 005….in sequence.
Fig. 6-38
Net Zone Number
Please Input 001
6.4.5 Customized
Setup
Input number 5 in the screen shown in Fig. 6-29 will enter customized setup screen as in
Fig. 6-39.
* Customize *
1. Outputs Setup
2. Mute delay Mode
3. Disable Password
Fig. 6-39
6.4.5.1 Outputs Setup
Enter number 1 in the screen of Fig. 6-39 will enter Outputs Setup screen shown in Fig.
6-40.
Содержание GST200
Страница 1: ......
