GST200 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
The Intelligent Solution
Page 35
1
Selecting number 1 will disable all delay settings in the system.
2
Selecting number 2 will enable system to output according to the edited delay time,
and light the
DISABLE
and
DELAY MODE
LED. Pressing
VIEW DISABLE
，
the
LCD will display “immediate actioning of outputs is disabled”.
Note: If the fire alarm is from a manual call point, then the system will output
immediately despite any delay settings.
6.3.3
Operation through STAR/STOP Key
Pressing
START/STOP
can start or stop loop devices, as shown in Fig. 6-20.
Fig. 6-20
*Start&Stop*
1 Start Devices
2 Stop Devices
3 View Start
4 View Delay
6.3.3.1 Starting Loop Devices
In the screen shown in Fig. 6-20 you can enter loop device start screen by entering
number “1”, as shown in Fig. 6-21. Similar to disabling devices, you can also start a
single device or multiple devices by using the asterisk wildcard.
Fig. 6-21
Start_up
Z000 C000 T00 NoDefine
6.3.3.2 Stopping Loop Devices
In the screen shown in Fig. 6-20, you can enter loop device start screen by entering
number “2”, as shown in Fig. 6-22. The operation is the same as starting device.
Stop_EQ
Z000 C000 T00 NoDefine
Fig. 6-22
Содержание GST200
Страница 1: ......
