manualshive.com logo in svg

GST GST200, Инструкция по установке и эксплуатации

Поделиться
Скачать
GST GST200 Скачать руководство пользователя страница 15

 

GST200 Intelligent Fire Alarm Control Panel                

 

Installation and Operation Manual

 

  

                                                  

      

 

 

The Intelligent Solution

 

 

Page 12  

associated devices and transmitting the signal back to the fire alarm control panel. 

I-9301 module is for connecting associated devices that need to be controlled by the 
FACP, such as smoke valve, fresh air valve, and damper valve. It can also receive 
answer signal from the devices. 

3.3.3 

Loop Isolator  

Loop Isolator can remove the shorted part of loop from the whole system to ensure 
normal operation of other devices and to ascertain the location of the part in fault. After 
the fault is repaired, the loop isolator can automatically reset the removed part into the 
system. 

3.3.4 Manual 

Call 

Points 

A series of manual call point (such as I-9202) can be connected to the loop of GST200. 
When fire is confirmed manually, press the glass on the MCP, alarm signal can be sent 
to the FACP. After receiving the alarm signal, the FACP will show the number and 
location of the MCP, and sound alarm.  

3.3.5 Sounder 

Strobes 

Addressable

 

sounder strobe is a kind of audible/ visual alarm device installed in the 

protected area, which can be activated by the FACP at the fire control center or by 
manual call points. A series of GST addressable sounder strobes (such as I-9403) can 
be connected to the loop of GST200. After activated, it will generate strong audible/ 
visual alarm signal. 

3.3.6 

GST852RP Repeater Panel  

GST852RP Repeater Panel is designed with a microprocessor. When one or more 
detectors alarm fire, the repeater panel can display the location and alarm message of 
the detectors with audible and optical signals. Through communication loops, it can be 
connected with FACPs, disposing and displaying the data from the FACPs.  When 
monitoring several floors or several zones with one fire alarm control panel, a repeater 
panel on each floor or in each zone can replace zonal fire alarm control panel. 

3.4 GstDef2.0 Defining Tool  

The software is used for editing and downloading definition of device and C&E equation. 
Before the system starts operation, you need to define the device and C&E using this 
software on a computer, and then download them to the FACP. 

 
 
 
 
 
 
 

Содержание GST200

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды