GST200 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
The Intelligent Solution
Page 7
3.1.1 Display
Area
The display area consists of clock, LCD, LED and keypad, which are shown in Fig. 3-3.
Fig. 3-3
3.1.2
Description of LEDs
FIRE:
Red. It illuminates when the FACP detects an alarm condition of connected
detectors. After fire alarm condition is removed, the fire status can only be cleared
by pressing Reset key, and this LED goes out simultaneously.
COMMON FAULT:
Yellow. It illuminates when the FACP detects fault of connected
devices or itself. It goes out automatically after the fault condition is removed.
DISABLED:
Yellow. It illuminates when connected devices, FP.E. output or
SOUNDER CIRCUIT OUTPUT are disabled and when the outputs are set in delay
mode. It goes out when such status is canceled.
MUTE:
Yellow. It illuminates when the FACP is in mute state. It goes out only when
new alarm sound comes.
AC FAULT:
Yellow. It illuminates when
230VAC power is down or damaged. After
the AC power resumes, it goes out automatically.
SYSTEM FAULT:
Yellow. It illuminates if the program encounters a dead halt. After
the system is rebooted, only by pressing
RESET
, can system fault be cleared, and
this LED goes out.
POWER HEALTHY:
Green. It illuminates when main or standby power is normal.
BATTERY FAULT:
Yellow. It illuminates when standby power is in fault. After the
fault is cleared, it will go out.
F.P.E. FLT/DISABLE:
Yellow. It flashes when
F.P.E. output is in fault and
illuminates steadily after the F.P.E. is disabled. It goes out after fault and disabled
conditions are cleared.
SOUNDER FLT/DISABLE:
Yellow. It flashes when the sounder circuit output
(Sounder A) and the sounders on the loop are in fault and illuminates steadily after
the sounder is disabled. It goes out automatically after the fault and disabled status
is cleared.
Содержание GST200
Страница 1: ......
