GSK GSK988TA, Руководство пользователя

Страница: 74 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
56
Ⅰ
Programming
compensation value and ends the block. When the measured position arrival signal does
not become “1”, and after the tool reaches the measured position distance
ε , the CNC
alarms, ends the block and does not update the offset compensation value.
Fig.2-17
G36, G37 automatic tool offset code use
From the initial position to the measured position specified by Xa (or Za) in G36(or G37), the tool
rapidly traverses to A zone and stops at T point (Xa– γ x (or Za– γ z) , and then traverses to B, C and D
at the feedrate set by No.6241( or No.6242). The system alarms when the tool traverses in B zone
and the measured point arrival signal of the end point is set to. The system alarms when the tool
stops at V point. No. 6241, No. 6242, No.6254 and No.6255 are set by the radius value.
Fig.2-18
Example:
G50 X760 Z1100; must have created a workpiece coordinate system
T0101; define No. 1 tool and execute its tool compensation
G36 X200; traverse to X toolsetting point ( X toolsetting point coordinate: 200)
G00 X204 ； retract a little
G37 Z800; traverse to Z toolsetting point ( Z toolsetting point coordinate: 800)