GSK GSK988TA, Руководство пользователя

Страница: 257 / 531

Chapter 3 Display Page
239
Ⅱ
Operation
Fig.3-17
Press the numerical value key to input the digits of 8 bits in binary system, and then press
key to confirm the setting is completed; when the length of the input value isn’t 8 bits, 0 is
supplied in high bit;
Moreover, the bit parameter can be set based on the bits:
（ 1 ） On the parameter setting page, the parameter to be set is selected by the keys ,
, and .
（ 2 ） The parameter bit to be rewritten can be selected by and keys.
（
3
）
key is repeatedly pressed, the parameter bit is switched between 0 and 1, and the
value of the parameter bit is rewritten.
（
4
）
Move the cursor to complete setting.
The other parameters to be set are selected by , , and .
Setting method of the parameters of the numerical value is similar with that of the parameters of
bit type:
(1) The parameter to be rewritten can be set by , , and keys; or
press or software keys to input the parameter sequence number or
the parameter name to be selected, and then press software key, finally move the
cursor to the parameter position.