GSK GSK988TA, Руководство пользователя

Страница: 156 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
138
Ⅰ
Programming
Command format
Command path
8
X2_ Z2_
，
C1_
；
X3_ Z3_
，
R2_
；
X4_ Z4_ ；
Or
， A1_ ， C1_ ；
X3_ Z3_
，
A2
，
R2_
；
X4_ Z4_ ；
Command explanations:
X2_ Z2_
，
C1_
；
X3_ Z3_
，
R2_
；
X4_ Z4_
；
Or
， A1_ ， C1_ ；
X3_ Z3_
，
A2
，
R2_
；
X4_ Z4_ ；
A line is specified by specifying one or two of X, Z, A. When one is specified, the linear must be
defined by a code in the next block.
When the angle, chamfer or corning R value of a line, it is specified by a code with the following
comma
（，） .
,A_
,C_
,R_
Note: when end coordinates and linear angle of two axes are specified, the supplementary angle
function is disabled. The codes in the above figure are programmed as follows:
X1_ Z1_;
X2_ Z2_ , A1_ C1_ ; (at this time, the supplementary angle A1 is invalid because of the
end coordinate X2 Z2 has confirmed the path instead of
supplementary angle to count).
●
A supplementary angle specifying a angle
When DDP(No.3405#5) is set to “1”
，
the supplementary angle can specify the angle.
Suppose that the supplementary angle is A’ ， the actual code angle is A ， so, the following
relationship is true.
（
X1
，
Z1
）
A1
（
X2
，
Z2
）
A2
（
X3
，
Z3
）
R2
（
X4
，
Z4
）
C1
A3
+X
+Z