GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual
【
Programming & Operation
】
376
Appendix
『
Modification authority
』
: Equipment management
『
Parameter Type
』
: Word axis
『
Value Range
』
: 0
~
4000 ms
『
Default Setting
』
: 100
Set the acceleration and deceleration of each axis cutting and feeding in index type, or the time
constant of acceleration and deceleration in linear type after interpolation.
And the detailed type is set by parameter CTLx (NO.1610#0). If CTLx sets the acceleration and
deceleration in linear type after linear interpolation, the maximum time constant of acceleration and
deceleration is limited in 512ms and even it exceeds 512ms, it is still dealt as 512ms.
1624
Time constant of acceleration and deceleration of each axis JOG
feeding after interpolation (JET)
『
Modification authority
』
: Machine
『
Parameter Type
』
: Word axis
『
Value Range
』
: 0
~
4000ms
『
Default Setting
』
: 100
Set the acceleration and deceleration in index type of each axis JOG feeding, and the time
constant of acceleration and deceleration in linear type after interpolation.
The detailed type is set by parameter JGLx (NO.1610#4). If JGLx sets the acceleration and
deceleration in linear type after interpolation, the maximum time constant of acceleration and
deceleration is limited in 512ms and even it exceeds 512ms, it is dealt as 512ms.
1625
FL speed of acceleration and deceleration in index type during
each axis JOG feeding (FLJ)
『
Modification authority
』
: Equipment management authority
『
Parameter Type
』
: Word axis
『
Value Range
』
:
VALID RANGE
SETTING UNITS
VALUE
UNITS
IS-B IS-C
DEFAULT
SETTING
Metric machine
1 mm/min
0
,
6
~
15000 0
,
6
~
12000 30
Inch machine
0.1 inch/min
0
,
6
~
12000 0
,
6
~
6000 30
Rotary axis
1 deg/min
0
,
6
~
15000 0
,
6
~
12000 30
Note: Except the special usage of the parameter, all axes must be set as the same time constant. If the
different time constants are set, the correct linear or circular can’t be shaped.
Содержание GSK988TA
