GSK GSK988TA, Руководство пользователя

Страница: 328 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
310
Ⅱ
Operation
Feedrate override knob
The override is in the specified range from 0 to 150%. For the special machine tool, the range is
remarked in the manual from the machine tool builder.
Override during the thread cutting: During thread cutting, the override is invalid and the feedrate
specified by the program is maintained.
6.4.5 Rapid Movement Override
The rapid movement speed has override of four levels (F0
，
25%
，
50% and 100%). Each axis
rapid traverse rate is set by the parameter #1420; F0 is set by the parameter #1421.
The steps of changing the rapid traverse override: During the rapid traverse, select one override
with the rapid traverse override buttons .
The rapid movements of the following types are all valid and the rapid traverse overrides all apply
to them:
(1) G00 rapid traverse
(2) Rapid traverse in the canned cycle
(3) Manual rapid traverse
(4) Rapid traverse of manual reference position return
(5) Rapid traverse in G28 and G30
6.5 Program Restart
When the tool is damaged in the Auto operation, alternatively, after resting for several days, if the
interrupted machine will be restarted from the resting position, the expected restart sequence number
of the block, or the program section number (from the beginning to the desired restart block) can be
specified; that is, the machining can be performed again from this block.
There are two methods for the restarting:
P: Restart executes when the tool is already damaged.
Q: Restart executes after the power is turned off (after resting for several days) or the ESP is
released.
Type P
Program restarts from any position.
Restart performs when the tool is damaged.