GSK GSK988TA, Руководство пользователя

Страница: 186 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
168
Ⅰ
Programming
Target tool number （ the leading zero can be omitted ）
******
N150 P2 S1800
（
change the 2
nd
spindle speed into 1800 rotation
）
*****
*****
N200 P1 S500 (the 1
st
spindle speed is executed to 500 rotations)
N210 P2 S700 （ the 2
nd
spindle speed is executed to 700 rotations ）
N220 M30
Note 1 ： No matter what the spindle uses the method, the spindle override is valid to the spindle which is
the last to start the rotation (CW/CCW).
Note 2
：
The spindle constant surface speed control is valid to the
1
st
spindle.
3.3 Tool Function
3.3.1 Tool Offset
Tool functions (T code) of GSK988TA/TB: automatic tool change and executing tool offset.
Control logic of automatic tool change is executed by PLC and tool offset is executed by NC.
Command format:
T □□ ○○
Command function: The automatic tool post rotates to the target tool number and the tool offset
of tool offset number executed is executed. The tool offset number can be the same as the tool
number, and also cannot be the same as it, namely, one tool can corresponds to many tool offset
numbers. After executing tool offset and then T □□ 00, the system reversely offset the current tool
offset and the system its operation mode from the executed tool length compensation into the
non-compensation, which course is called the canceling tool offset, called canceling tool
compensation. When the system is switched on, the tool offset number and the tool offset
number displayed by T code is the state before the system is switched off, the tool offset number
is in the cancelling state(i.e. 00 state).No. 3032 sets T code digit, and No.5002 Bit 0(LD1) sets
the digit of tool offset number.
Toolsetting is executed to gain the position offset data before machining (called tool offset), and
the system automatically executes the tool offset after executing T code when programs are
running. Only edit programs for each tool according to part drawing instead of relative position of
each tool in the machine coordinate system. If there is error caused by the wearing of tool,
directly modify the tool offset according to the dimension offset.
Tool offset number
（
the leading zero cannot be omitted
）