GSK GSK988TA, Руководство пользователя

Страница: 367 / 531

Chater 10 Machining Example
349
Ⅱ
Operation
the workpiece excircle dimension is measured (the measured value is 135mm); the system switches
to the tool offset page and moves the cursor toward #001 offset, and software key is
pressed to enter the measuring input page, and X135 is input on the input page ,
and then is pressed, X axis tool offset is input.
（
6
）
Move the tool into the safe position, and execute the 2
nd
tool by pressing the tool change key
in Manual mode;
(7) Start the spindle and move the tool into the tool setting position, which is shown as Fig. 10-8,
point A:
Fig.10-8
(8) The system switches into the tool offset page, and the cursor is moved toward #002 offset,
the software key is pressed to enter the measuring input page, X135 is input
on the input page , and software key is pressed, Z0 is input
with the same method;
(9) Move the tool into the safe position, and execute the 3
rd
tool by pressing the tool change key
in Manual mode;
(10) Start the spindle and move the tool into the tool setting position, which is shown as Fig.
10-9, like point A: