GSK GSK988TA, Руководство пользователя

Страница: 308 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
290
Ⅱ
Operation
4.4 Generating a Block Number
In the program, the block number can be input or not, the program is executed based on the
inputting sequence (except for calling).
On the setting page set, CNC sets the page, when “automatic sequence number” switch is OFF,
CNC doesn’t automatically generate the block number, while the block number can be input manually
during programming.
On the setting page set, when “automatic sequence number” switch is ON, CNC automatically
generates the block number, and the block number of the next block is automatically generated by
pressing key for line feed, and the incremental value of the block number is set by CNC data
parameter #3216.
4.5 Program Backstage Editing
When Auto or DNC mode is being operated, the key is pressed to enter the program
page, and the program to be edited can be opened or created, the operation method is same as that
introduced previously.
Note 1: The currently running program can’t be edit;
Note 2: key can’t be pressed when Auto or DNC mode is being operated and the program is being
edited at the backstage; otherwise, the running program will stop due to resetting.
4.6 Program Run
In Auto or MDI mode, press key after the program is open, and the program automatically
runs.