GSK GSK988TA, Руководство пользователя

Страница: 214 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
196
Ⅰ
Programming
4.2.4 Tool Traversing in Offset Canceling Mode
In compensation mode, when the system executes G04, it enters the compensation canceling
mode, which is defined to compensation canceling of block. The system cannot execute the
circular code(G02 or G03) in canceling tool compensation mode, otherwise the system alarms
and stops run.
(a) Tool traversing inside along corner( α≥ 180°)
(b) Tool traversing outside along corner(180°
＞
α≥ 90°)
(c) Tool traversing outside along corner( α ＜ 90°)
Fig. 4-50 Linear—linear (cutting outside and
canceling offset)
Fig. 4-49 Linear—linear (cutting outside
and canceling offset)
Fig. 4-46 Circular-linear (moving inner
and canceling offset)
Fig. 4-45 Circular-linear (moving inner
and canceling offset)
Fig. 4-47 Circular—linear
（
moving
outside and canceling offset
）
Fig. 4-48 Circular—linear
（
moving
outside and canceling offset ）