GSK GSK988TA, Руководство пользователя

Страница: 321 / 531

Chapter 6 Auto Operation
303
Ⅱ
Operation
switched off. After the emergency stop button is released, the emergency stop alarm is released,
CNC enters the resetting status.
4. Switching the operation mode
During automatic running, the system switches into the reference position return, MPG/single
step and the manual mode, the current block “dwells” immediately; during automatic running, when
the system is switched into Edit or MDI mode, the currently running block stops after running is
completed.
Note 1: The emergency stop alarm is released after the trouble is shot;
Note 2: Before power on or off, press the emergency stop button to reduce the electric shock upon the
equipment;
Note 3: After the emergency stop alarm is released, the reference position return is executed, again to
guarantee the correctness of the coordinate position.
6.2 Manual Data Input (MDI) Running
6.2.1 Editing the Program in MDI mode
（
1
）
On the program display page set, press key to enter MDI mode, and the page is
shown as Fig. 6-3:
Fig.6-3
（
2
）
On the program edit column below the block (MDI), input the block (maximum 10 lines) to
run, the method of editing the program to be executed is similar with the common one. The program
set in MDI mode is valid for rewriting and deleting the word. About editing the program, refer to the 5
th
chapter.
（
3
）
After inputting the block, the cursor is moved to the program ahead and the program is
started to be executed (if the cursor is on some block, the system is executed from the block). After
pressing key, MDI command word is started to be executed from the line on which the