GSK GSK988TA, Руководство пользователя

Страница: 262 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
244
Ⅱ
Operation
3.3.4 System File Management
In the system page set, press software key to enter the file management display
page and the page is shown in Fig.3-20:
Fig.3-20
The window is divided into the left and right columns. The left display column is displayed the
system files and the content of the part program files; when the system is with the U disc, the right
display column is displayed the file content in the U disc, which is shown in the above figure. Then,
the system files can be input and output, and the files in the system can be output to the U disc, or the
files in the U disc can be input into the system.
(1) Press software key to switch the cursor between the left file content column
of the system and the right content column in U disc.
(2) When the cursor is on the file folder, press and to fold and unfold the file.
(3) Press , keys to move the cursor to the file to be operated, and press
key to select the file and the selected file is ticked off, like the part programs O0098
，
O0003 and
O0777 in the system file content. When the cursor is on the selected file, then, key is pressed
to select all files in the folder.
(4) Then, after the system files are selected, software key is pressed to output all
the selected files into the U disc; same, after the files in the U disc are selected,
software key is pressed to input all the selected files into the system file content.