Smart Climate 310 rev. 03 19
Winter and Summer Reference T°
Set the temperature that signals the beginning of winter and
summer.
Accessible if the outside compensation function is enabled above.
Use the Static Pressure Sensor
Select
Yes
if a static pressure sensor is connected to the auxiliary
module.
Use the Static Pressure Compensation
Select
Yes
to activate the static pressure compensation (refer to
the Static Pressure Compensation chapter).
Available if the static pressure sensor is enabled above.
Number of variable stages
Select the number of variable-speed fan stages (1 to 5 stages).
Use variable output 3:
Select
Yes
to use the 3
rd
variable output (note that variable outputs
1 and 2 are enabled by default).
Heating stages:
Enable the desired number of heating stages (0 to 4 heating
stages).
0-10V Output:
Select
Yes
to enable the
0-10V output.
Use Mist:
Select
Yes
to enable the mist stage.
Air inlet:
Enable the desired number of air inlets (0 to 2 inlets).
NOTE:
Internal switch number 6 allows enabling the inlet
outputs. This switch is located inside the auxiliary module on
the
Controller Function
switch block. Set switch number 6 to
the OFF position to use one inlet or switch it to the ON position
to use two inlets.
Содержание Smart Climate 310
