GREMO 1050F4, Инструкция по эксплуатации, Страница: 67 / 198

Gremo1050F4 Instruction manual
4 Instruments and controls
4.7 Functions at the rear panel
4.7 Functions at the rear panel
1
2
3
4
G
0
0
3
9
0
Fig. 47 Functions at the rear panel
ID Function Comments
1 Forward pedal Selects driving direction forward, when the drive direction selector (on
the left armrest panel) is in neutral.
2 Back pedal Selects driving direction reverse, when the drive direction selector (on
the left armrest panel) is in neutral.
3 Drive pedal The drive pedal acts on both the steering system’s operational revs
and the machine’s driving speed in the following way:
• if the crane controls are not activated, the drive pedal functions like
a regular accelerator pedal.
• if the crane controls are being used, the preset operating revs are
active (e.g. 1300 rpm): when the Drive pedal is activated, it
operates like a speed control. In this mode, it interacts with the
speed potentiometer (on the left armrest panel) in such a way that
the machine’s maximum speed corresponds to the set value on the
speed potentiometer. If the Drive pedal is pressed even further, not
only will speed increase, so too will engine revs.
4 Brake pedal
63