
Gremo1050F4 Instruction manual
7.4.2
Checking oil level
Fig. 128 Checking oil level
1. Park the machine on a level surface.
Warm engine
:
switch off engine, wait 15 minutes and check the oil
level.
Cold engine:
check the oil level.
2. Pull out the dipstick.
3. Wipe the dipstick clean with a clean, non-fibrous cloth.
4. Reinsert the dipstick all the way in and pull it out again
while turning it.
5. Check the oil level, and if required top up with oil to the
H-mark.
B
G0649
A
C
Fig. 129 Oil dipstick
A.
Oil level too high
B.
Correct engine oil level
C.
Oil level too low
If the oil level is just above the L-mark, it should be topped
up.
The amount of oil between L and H is around 2 litres.
NOTICE
Never operate the engine with the oil level below the L
level or above the H level. Poor engine performance or
engine damage may result.
7.4.3
Refilling engine oil
1
Fig. 130 Refilling engine oil
Pour the oil into the filling opening (1).
Lubricating oils
Quality grades
See the service and maintenance manual for details of
recommended oils.
If in doubt contact your service dealer.
7.5
Cooling system
7.5.1
General
Service and maintenance intervals for the cooling system
are outlined in the service and maintenance manual.
147
Содержание 1050F4
