GREMO 1050F4 Скачать руководство пользователя страница 148 | Manualshive

Страница: 148 / 198

GREMO 1050F4 Скачать руководство пользователя страница 148

7.3 Fuel system

Gremo1050F4 Instruction manual

7.3.2

Filling fuel

Fig. 120 Filling fuel

Fig. 121 Starting fuel pump

There are three options when it comes to refilling fuel:

• The fuel is filled via the filling line on the rear right hand

side of the forwarder. Remove the lockable tank cap
and fill from a fuel can, for example. The fuel tank cap is
vented using a check valve so that the fuel does not run
out if the machine capsizes.

• A 24 V outlet (1) is included as standard under the cover

to operate an external fuel pump.

• As an optional extra, the machine can be fitted with an

automatic fuel pump, see Fig. 120

Connect the filling hose to the 1/2” quick connection and
start the pump by pressing the ON button (2). The tank
is fitted with a level monitor which automatically stops
the pump. It is also possible to manually stop the pump
by pressing the OFF button.

NOTICE

Ignition has to be activated to be able to use the
automatic fuel pump.

Fig. 122 Fuel filling line

CAUTION

Fill with fuel with the engine turned off but with the main
power switch and ignition on.

Never leave the machine unattended.

144

«
...
146
147
148
149
150
...
»

Содержание 1050F4







































































































































































































Отзывы:

Нет отзывов