GREMO 1050F4 Скачать руководство пользователя страница 190

Страница: 190 / 198

13 Technical data

13.12 Load carrier

Gremo1050F4 Instruction manual

13.12

Load carrier

Type

Three detachable bunks with separate supports.

The two rearmost bunks are adjustable.

Hydraulically operated folding gate (electrically controlled)

Load area

3.5 m²/4.3 m²

Load capacity

10.5 tonnes

13.13

Cab

Type

Welded construction with roll profiled A, B and C posts in
high-durability steel. Tested and approved as per EN ISO
3449, 8083 and 8084 (ROPS, FOPS, OPS).

Suspension

4 fluid-filled bushings on the underside of the cab. Tilt bar to
the right around 60° manual or electric pump.

Operator environment

The cab is sound and heat-insulated. Meets requirements
as per 77/311EEG.

Windows

All the windows are made of polycarbonate safety glass.

Emergency exit

Opening side window.

Windshield wipers

Intermittent wiper with parallel drive. Front and rear.
Optional extras include side wipers and windscreen washer.

Operator’s seat

Air-sprung electrically-heated operator’s seat with electrical
seat brake.

Air conditioning system

Fully-automatic heating and cooling.

Other equipment

Radio/CD player with two speakers.

Vision camera, front/rear, with colour monitor.

sunshade in top of rear window.

186

Содержание 1050F4







































































































































































































Результаты поиска

Содержание 1050F4

Отзывы:

GREMO 1050F4, Инструкция по эксплуатации, Страница: 190 / 198

Результаты поиска

Содержание 1050F4

Отзывы: