
Gremo1050F4 Instruction manual
NOTICE
The direction selector (1) on the armrest panel must be
in ‘neutral’ position in order for the direction pedals to
work
NOTICE
If you start the engine with the direction selector (1) in
position ‘Forward’ or ‘Backward’ the machine will not
move. In order to move the machine, you must first put
the direction selector in position ‘Neutral’ and then select
the travelling direction.
6.12
Gear selection
The machine's gearbox is a mechanical dropbox with one
low speed register (1) for off-road transport and one high
speed register (2) for road transport.
6.12.1
Gear selection
Fig. 105 Controls, gears
The gear selector on the right armrest panel has two
positions:
1. Gear selector
reverse
= 1
st
gear
2. Gear selector
forward
= 2
nd
gear
Gear selection using the gear selector can be up/down
when in transport independent of speed and load. But the
control system prevents shifting until the machine is
stopped. The brake system must be activated.
A diode is depicted in GreControl main window’s top edge.
For a green light, the gear engages and a red light warns
the controller that the gear not has been engaged, so turn
the machine slightly with the off-road steering lever.
6.13
Working speed
With the value set to zero, the drive pedal functions like a
regular accelerator pedal. Working speed (1,200-1,500
rpm) is enabled as soon as the crane controls are used.
127
Содержание 1050F4
