GREMO 1050F4 Скачать руководство пользователя страница 24

Страница: 24 / 198

2 Safety regulations

2.9 Inspection of parking brake

Gremo1050F4 Instruction manual

2.9

Inspection of parking brake

The parking brake is a safety detail and its working order
should be checked.

• Place the fully-loaded machine on a slight slope, 10-12

degrees, or a climb of 2 m per 10 m with free rolling
movement with no obstacles.

• Stop the machine.

• Engage parking brake.

• Switch off the engine.

• The machine should now be standing completely still

without rolling.

• Start the engine and turn the machine around. Repeat

the procedure with the machine facing in the other
direction.

2.9.1

Manual release of parking brake

WARNING

Before starting the work of manually releasing the
parking brake, ensure that the machine's wheels are
locked to prevent it from rolling.

NOTICE

If the parking brake does not release, it may be
necessary to manually release it to move the machine.

Содержание 1050F4







































































































































































































Результаты поиска

Содержание 1050F4

Отзывы:

GREMO 1050F4, Инструкция по эксплуатации, Страница: 24 / 198

Результаты поиска

Содержание 1050F4

Отзывы: