GREMO 1050F4, Инструкция по эксплуатации, Страница: 10 / 198

1 Introduction
1.5 Operator requirements
Gremo1050F4 Instruction manual
• If there are any unauthorised people or vehicles within
the machine's operating area.
1.5 Operator requirements
• The machine can only be operated by operators with
permission from work supervisors and the necessary
knowledge.
• National laws and regulations relating to driving
licences, operator certificates, etc. must be complied
with at all times.
• Operators must be aware of and follow all local safety
rules.
• Operators must follow the manufacturer's instructions.
• Operators must read and understand the machine's
warning and information signs, as well as understand
and be able to use the machine's protection and
warning equipment.
1.6 Safety regulations
Each country has its own national and local safety
regulations, and it is the responsibility of both the owner
and the operator to know and follow these regulations. If
the recommendations in this Instruction Manual differ from
the national and local safety regulations, then the national
and local safety regulations take precedence over the
recommendations in this Instruction Manual.
During the design and testing of the machine, a great deal
of effort has been made to make the machine safe and
efficient. These efforts may be completely wasted if the
safety and maintenance regulations are not followed.
Accidents are usually caused by humans, not by the
machine. A well-maintained machine and a safety-aware
owner/operator is a profitable and safe combination.
A Gremo machine meets the requirements of the
Machinery Directive and the harmonised standards, plus
national requirements and provisions.
6