GREMO 1050F4, Инструкция по эксплуатации, Страница: 27 / 198

Gremo1050F4 Instruction manual 2 Safety regulations
2.10 Driving
2.10 Driving
The working speed is set between 1,200-1,500 rpm in the
Control System GreControl/IQAN monitor.
As soon as you start to use the crane levers the working
speed is activated, and when you release the crane levers
the revs reduce to an increased idle after the time delay
selected in GreControl. This occurs when the seat is facing
backwards towards the crane/gate.
Driving on public roads
When driving on public roads with other traffic, the steering
wheel must always be used, and the terrain driving
function must be turned off.
Driving speed
A Gremo 1050F is designed to manage a maximum load
of 10,500 kg, even on difficult terrain. Off-road driving
causes large dynamic forces on the machine. The
machine’s own weight, plus the load, increases the stress
in its construction if driven carelessly over difficult terrain.
By driving gently, with feeling and understanding, you can
avoid costly repairs and downtime.
Uphill
When driving uphill, the centre of gravity of the payload is
shifted backwards, exerting a lifting force on the front
carriage. If the machine is angled severely in this situation,
it can tip over..
Downhill
The load’s centre of gravity is moved forward when driving
down a slope, and exerts a pushing force on the engine. If
the machine is angled severely in this situation, it can tip
over..
Fig. 17 Overload
NOTICE
Never load over the top of the gate!
Overloading leads to worse stability, and during downhill
driving the timber may slide over the gate and damage
the machine.
23