GREMO 1050F4, Инструкция по эксплуатации, Страница: 32 / 198

2 Safety regulations
2.14 Service
Gremo1050F4 Instruction manual
2.14 Service
Read through the Instruction Manual, note the machine’s
warning decals and check the purchasing contract before
carrying out any servicing. During the guarantee period, all
servicing and repairs must be carried out by personnel
approved by Gremo AB.
Rebuilding and/or modifying the machine (mechanically or
electrically) is done at your own risk, and Gremo takes no
responsibility for the consequences.
Be aware that the safety system may become disabled!
It is the rebuilder’s responsibility by law to document and
perform a risk assessment on the design (the whole
machine with the modifications).
In respect of welding (see 2.18 Welding Repairs , page 32),
Gremo should be contacted if any welding is being
considered. Welding can considerably worsen the
machine’s abilities and lifespan.
At the slightest uncertainty in conjunction with a repair, it is
better to contact Gremo/service provider prior to any
repairs being carried out.
WARNING
Risk of serious crushing injury or fatal accident!
Always switch off the engine before releasing the cab to
tip it up.
Never go under a tipped-up cab unless it is propped up.
Ensure that the cab is propped up if you need to go
under it!
WARNING
The bogie lift can be used as a lifting aid during service
and repairs, but always prop up the machine.
WARNING
When you lift or prop up the machine or parts of the
machine, make sure that the equipment you use is
intended for this purpose, is appropriately dimensioned,
and cannot slip or tip over!
28