GREMO 1050F4 Скачать руководство пользователя страница 31

Страница: 31 / 198

Gremo1050F4 Instruction manual

2 Safety regulations

2.13 Trailer transport

2.13

Trailer transport

DANGER

Major demands are placed on lifting and transport
equipment, e.g. lifting chains, hooks, etc.

Danger!

Check the equipment and its capacity, the lifting straps
on the machine and the lashing points on the transport
vehicle and machine.

DANGER

Overloading of lifting equipment.

Danger!

Lifting equipment must be dimensioned to handle the
load. Never walk underneath a suspended load.

• Place the machine centred sideways on the loading

platform.

• Affix the machine at the 8 fixing eyelets.

• To lock the mid-section, turn and lock the red stop heels

in the mid-section.

• Lock the door.

• Check the height and width of the loaded machine; see

the Technical Data chapter in the Instruction Manual.

Содержание 1050F4







































































































































































































Результаты поиска

Содержание 1050F4

Отзывы:

GREMO 1050F4, Инструкция по эксплуатации, Страница: 31 / 198

Результаты поиска

Содержание 1050F4

Отзывы: