GREMO 1050F4, Инструкция по эксплуатации, Страница: 114 / 198

5 User manual for GreControl control system
5.14 System settings window
Gremo1050F4 Instruction manual
For each function, it must be possible to change values
within a given area to protect the components used when
steering.
NOTICE
Note that operator 0 is the default operator set at the
factory.
Select an operator other than 0 to carry out any personal
settings.
5.14.4 Copy operator settings
Fig. 84 GreControl, copy operator settings
The function groups with this symbol can be copied.
There are five operators in addition to Operator 0 which is
the default operator set at the factory.
First activate the operator to copy to, see the change of
operator section under Hydraulics window.
Go to Adjust and select for instance Crane pressure ,
then select Copy mode and click on the operator to be
copied and confirm with .
110