Gregoire Besson SP9 COMPACT, Инструкция по эксплуатации и техническому обслуживанию

Страница: 67 / 108

Operation manual SP 9 - Compact
CHAPTER VIII – TRANSPORT – Page 1
8. TRANSPORT
8.1. BEFORE TRANSPORTING
8.1.1. The adjusting of the plough for
transportation:
In the transporting position the breasts are placed horizontally and
the plough is behind the tractor in one line.
This position (horizontal breasts) are at the same time disengaging
position.
8.1.2. Before using the plough on the public roads
Before going onto the public road:
¾
Put the plough into the transporting position in accordance to
the instruction,
¾
Pay attention that required lights and signals are properly
mounted, they must be clean and work well (lights, reflectors,
etc.)
Keep Highway Code rules on the public roads:
¾
Do not overcome the allowed maximum width or length. If it is bigger than the maximum size
follow the rules for special transporting (escort, special tables and signs, authority
permission).
¾
Keep the maximum axle loading and tractor and freight allowed maximum weight. Be sure
that the loading of the first tractor axle is never lower than the tractor mass 20 % . If it is
necessary put some ballast on the front part of the tractor.
8.1.3 Releasing and blocking of the reverser during the transport
In order to avoid any accident the plough has been mounted with reverse blocking device.
With the help of it the wrong operations during transporting can be avoided.
Because of the blocking device the plough can not turn over in the case of hydraulic pipe or unit
disruption.
In tightened condition the axle (3) adapts into the fastening holder (4) which provides the tightening.
The position of the axle can be directed by the lever (5) which is placed at the front of the reversing
unit.
Be sure of blocking before transporting the plough.